Brass Strainer Screens, Wire Cloth Woven of 80-20 Brass
 

INDUSTRIAL HARDWARE CLOTH

printable version

 
 

HOT DIP GALVANIZED AFTER WIRE MESH

 
Hardware Cloth is constructed of the lightest wire diameter which a given mesh can be produced with good stability.
 
The larger openings including 2, 3 and 4 Mesh are typically welded while the 8 Mesh is woven.   After welding or weaving, Industrial Hardware Grades are Hot-Dip-Galvanized to provide protection against rust.
 

Data Sheet

Wires Per Linear Inch

Hardware Cloth Opening

Wire Gauge

Wire Diameter After Galvanizing

Percent Open Area

Inches

M.M.

#

Inches

M.M.

PDS

2 Mesh

0.458"

11.63

19

0.0420"

1.07

83.9%

PDS

3 Mesh

0.301"

7.64

21

0.0327"

0.83

81.3%

PDS

4 Mesh

0.223"

5.66

23

0.0268"

0.68

79.7%

PDS

8 Mesh

0.107"

2.71

27

0.0183"

0.46

72.9%

 

 Mesh

Center - Center Wire Spacing

Standard 100' Long Roll Widths

2 Mesh

1/2" x 1/2"

24" 30" 36" 48" 60" 72"

3 Mesh

1/3" x 1/3"

24"

30"

36" 48" 60" 72"

4 Mesh

1/4" x 1/4" 24" 30" 36" 48" 60" 72"

8 Mesh

1/8" x 1/8" 24" 30" 36" 48"    

HARDWARE CLOTH VALUES ARE APPROXIMATE

 
Call  800.440-MESH
 
By using this website, you are agreeing that you have read and accepted the Terms of Use Agreement
If you do not agree to these terms, please do not use this website.
  Copyright 2009  Screen Technology Group, Inc.   All Rights Reserved.  
 

Last modified: December 23, 2012