 |
|
|
| |
|
Mill Grade is wire cloth woven of lighter
wire diameters than Market Grade, providing a greater percentage of screening
open
area. When greater strength or wear life is required
consider Market Grade. If useable open area is more important than
strength, consider using
Bolting Cloth. |
| |
|
For additional information regarding the range of openings normally
available in the various specification groups, please visit the Mesh
Locator. |
| |
|
To access more detailed information on any of the specifications listed
below click on the adjacent PDS link to the printable Product Data Sheet. |
|
Sieve* Opening |
Data Sheet |
|
Diameter
of Wire |
Width
of Opening |
|
Open Area |
|
T-304 |
T-316 |
Inches |
mm |
Inches |
mm |
|
PDS |
PDS |
2 Mesh |
0.0540" |
1.37 |
0.446" |
11.33 |
0.380 |
79.6% |
|
PDS |
PDS |
3 Mesh |
0.0410" |
1.04 |
0.292" |
7.42 |
0.328 |
76.7% |
|
PDS |
PDS |
4 Mesh |
0.0350" |
0.89 |
0.215" |
5.46 |
0.279 |
74.0% |
|
PDS |
PDS |
5 Mesh |
0.0320" |
0.81 |
0.168" |
4.27 |
0.335 |
70.6% |
|
PDS |
PDS |
6 Mesh |
0.0280" |
0.71 |
0.139" |
3.53 |
0.308 |
69.6% |
|
PDS |
PDS |
7 Mesh |
0.0280" |
0.71 |
0.115" |
2.92 |
0.362 |
64.8% |
|
PDS |
PDS |
8 Mesh |
0.020" |
0.51 |
0.105" |
2.67 |
0.209 |
70.6% |
|
PDS |
PDS |
8 Mesh |
0.0250" |
0.64 |
0.100" |
2.54 |
0.329 |
64.0% |
|
PDS |
PDS |
9 Mesh |
0.0230" |
0.58 |
0.088" |
2.24 |
0.314 |
62.7% |
|
PDS |
PDS |
10 Mesh |
0.0200" |
0.51 |
0.080" |
2.03 |
0.264 |
64.0% |
|
#12 |
PDS |
PDS |
12 Mesh |
0.0180" |
0.457 |
0.065" |
1.65 |
0.257 |
60.8% |
|
PDS |
PDS |
14 Mesh |
0.0170" |
0.432 |
0.054" |
1.37 |
0.269 |
57.2% |
|
PDS |
PDS |
16 Mesh |
0.0160" |
0.406 |
0.0465" |
1.18 |
0.274 |
55.4% |
|
PDS |
PDS |
18 Mesh |
0.0150" |
0.381 |
0.0406" |
1.03 |
0.271 |
53.4% |
|
PDS |
PDS |
20 Mesh |
0.0140" |
0.356 |
0.0360" |
0.91 |
0.264 |
51.8% |
|
PDS |
PDS |
22 Mesh |
0.0135" |
0.343 |
0.0320" |
0.81 |
0.271 |
49.6% |
|
#25 |
PDS |
PDS |
24 Mesh |
0.0130" |
0.330 |
0.0287" |
0.73 |
0.275 |
47.4% |
|
PDS |
PDS |
26 Mesh |
0.0110" |
0.279 |
0.0275" |
0.70 |
0.211 |
51.1% |
|
PDS |
PDS |
28 Mesh |
0.0100" |
0.254 |
0.0257" |
0.65 |
0.188 |
51.8% |
|
#30 |
PDS |
PDS |
30 Mesh |
0.0095" |
0.241 |
0.0238" |
0.61 |
0.182 |
51.0% |
|
PDS |
PDS |
32 Mesh |
0.0090" |
0.229 |
0.0223" |
0.57 |
0.175 |
50.9% |
|
PDS |
PDS |
38 Mesh |
0.0085" |
0.216 |
0.0178" |
0.45 |
0.187 |
45.8% |
|
#40 |
PDS |
PDS |
40 Mesh |
0.0085" |
0.216 |
0.0165" |
0.42 |
0.197 |
43.6% |
|
#45 |
PDS |
PDS |
45 Mesh |
0.0080" |
0.203 |
0.0142" |
0.36 |
0.198 |
40.8% |
|
PDS |
PDS |
50 Mesh |
0.0075" |
0.191 |
0.0125" |
0.32 |
0.190 |
39.1% |
|
PDS |
PDS |
55 Mesh |
0.0070" |
0.178 |
0.0112" |
0.28 |
0.187 |
37.9% |
|
#60 |
PDS |
PDS |
60 Mesh |
0.0065" |
0.165 |
0.0102" |
0.26 |
0.176 |
37.5% |
|
| |
|
*
The specifications above with a Sieve Opening number in the far left
column are not the recommended test sieve specifications regarding the
wire diameter although the screen opening does comply with the specified
Sieve opening according to tolerances permitted for the average openings. |
|
These specifications
should be considered for enhanced production purposes as the open areas
are larger than the standard ISO Sieve specifications. |
|
|
|
Mill Grade Wire Cloth Table
|
|
Call 360.835.7507 |
|
|
|
|
